What does 'd-Err' mean on KERN EW - 600 - 2M Scales?
A 'd-Err' message indicates that: * Adress data related to determine the capacity has been destroyed – contact the shipper. * The EW/EG board is defective – consider replacing it.
Illustrates the electronic components and connections for the KERN EW model.
Shows the block diagram for the electronic construction of the KERN EG model.
Details the complete wiring schematic for the KERN EW series balances.
Presents the overall wiring layout for the KERN EG precision balances.
Step-by-step guide to diagnose and resolve issues with the KERN EW/EG balances.
Lists common symptoms and their potential causes and remedies for EW/EG balances.
Essential primary checks to perform before detailed troubleshooting of the scale.
Instructions on how to safely remove the upper and lower cases of the balance.
Explanation of the ON/OFF lock switch function and its impact on settings.
Procedure for correctly covering the balance after servicing or adjustments.
Procedure for performing span calibration on KERN EW series balances.
Steps to adjust corner errors using adjustment bolts on the balance mechanism.
Guide on how to set and adjust the overload stoppers for protection.
Procedure for calibrating the internal reference weight on EG series scales.
Step-by-step guide for replacing the weighing mechanism unit.
To Next Page
General
