KERN KFB-TM Service Manual

KFB-TM/KFN-TM-SH-e-1410 - 14 -
PR1
Output after pressing
PR2
Manual totalizing, see chap. Fehler!
Verweisquelle konnte nicht gefunden
werden.
Press and the weighing value will be
added to the summation memory and issued.
AUTO
For automatic totalizing see chap. Fehler!
Verweisquelle konnte nicht gefunden
werden.
This function is used to issue and add
individual weighing values automatically to the
summation memory on unloading of weighing
scale.
ASK
For remote control commands, see chap. 7.4
wireless
Not documented
baud
Available Baudrate: 600, 1200, 2400, 4800, 9600
Pr
7E1
7 bits, even parity
7o1
7 bits, odd parity
8n1
8 bits, no parity
PtYPE
tPUP
Standard printer setting
LP50
Not documented
Lab
Lab x
Details see following table 1
Prt
Prt x
Lang
Eng*
Standard setting English
Chn
P2 mode
Konfigurations-
daten
SiGr
Single-range balance
COUNT
Display internal resolution
DECI
Position of the decimal dot
Div.
Readability [d] / verification value[s]
CAP
Balance capacity [Max]

KERN KFB-TM Specifications

General

Brand	KERN
Model	KFB-TM
Category	Monitor
Language	English