To Next PageTo Next Page
Need help?Do you have a question about the KERN KFS-TM and is the answer not in the manual?
Details the displays for weight, average item weight, and quantity.
Describes the function of each button on the KERN KFS-TM display unit.
Explains the different audio signals and their meanings.
Details the intended use of the display unit as a non-automatic weighing system.
Lists prohibited uses and potential damages to the unit.
Outlines conditions that void warranty claims.
Emphasizes regular checks of weighing-related properties and testing weights.
Advises careful reading of the manual before setup and commissioning.
States that only trained personnel may operate and maintain the appliance.
Instructions for checking packaging and the appliance for damage upon receipt.
Guidelines for keeping original packaging and proper procedures for return transport.
Advises on selecting a suitable location for precise and fast weighing.
Lists the items included in the delivery of the display unit.
Provides steps for carefully removing and placing the display unit in the work area.
Instructions for connecting the appliance to the power supply using the mains adapter.
Explains the necessity and process of adjusting the unit to local gravity.
Explains linearization to improve linearity deviation and the procedure.
Explains the EU directive for verifying weighing systems and legal validity.
Describes the process of turning on the appliance and its self-test.
Instructions for turning off the display unit.
Explains how to reset the balance to zero to correct for minor soiling.
Step-by-step guide for performing a basic weighing operation.
Details the procedure for weighing with a tare function and add-on weighing.
Explains how to use the unit for counting parts based on average piece weight.
Describes the process of summing up weighing values or quantities.
Explains how to weigh goods within specified tolerances.
Allows allocating an ID to pre-tare or reference weight functions.
Guides on setting the date, time, and screen saver options.
Describes the balance's ability to save overload weighing results.
Lists menu items and available settings for non-verifiable systems.
Lists menu items and available settings for verifiable systems.
Provides technical specifications for RS232 and signal lamp CFS-A03.
Lists commands and their functions for remote control.
Shows examples of printouts when the PRINT or ID button is pressed.
Instructions on how to clean the appliance safely.
States that only authorized service technicians may open the appliance.
Guidelines for disposing of packaging and the appliance according to local law.
Lists supply voltage, sensitivity, and resistance parameter.
Explains factors to establish before selecting a weighing cell.
Provides steps and diagrams for connecting a platform to the display unit.
Guides through the process of configuring display settings via the menu.
Provides a detailed overview of menu blocks, items, and settings.
Explains how to connect scales using interface cables CCA-A01 and CCA-A02.
Guides through menu settings for manual transmission of average item weight.
Details menu settings for automatic or manual transmission of average item weight.
Shows wiring diagrams for connecting the counting system to a signal lamp.
Illustrates wiring diagrams for connecting the counting system to a printer.
General