48 KFS-TM-BA_IA-e-1920
„00.00“ (example) is displayed flashing; now enter here subsequently day and
month, starting with the left decimal place.
Example: 08.04.
Enter the values in the sequence 0-8-0-4
(example)
Confirm by , „Set dA“ is displayed
Year, month and day now are set
Setting time:
Use to select „Set ti“, here the clock time is set
Confirm by , „Set dA“ is displayed
the previously set clock time is displayed flashing.
Use the numeric keypad to enter the clock time, in the sequence:
Example: 12:48 o’clock: enter 1-2-4-8 subsequently
Press ,
now the clock time has been set.
Press (several times) to return into weighing mode.
• Enter the format „D m y“ in the same manner.
Switch the screen saver by setting „SLP off“ in the menu.
To Next Page
Loading...
