22 KFS-TM-BA_IA-e-1920
7 Operation
7.1 Start-up
Press , the appliance will carry out a self-test. As soon as the weight display
appears, the instrument will be ready to weigh.
7.2 Switching Off
Press , the display will disappear.
7.3 Zeroing
Resetting to zero corrects the influence of light soiling on the weighing plate.
Resetting range ± 2 % max.
To unload the weighing system
Press , the zero display as well as the indicator [] next to a will appear.
7.4 Simple weighing
Place goods to be weighed on balance.
Wait for stability display [].
Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding maximum loads is indicated by the display of “O-err“, and an audio
sound. Unload weighing system or reduce preload.
To Next Page
Loading...
