Press and the display for entering the capacity for the first
weighing range will appear.
Press and current setting will be displayed.
Select desired setting with and acknowledge by .
Press to select the next menu item used to enter the
capacity for the second weighing range.
Press and current setting will be displayed.
Select desired setting with and acknowledge by .
Press , the unit will return to the menu
Use toselect next menu item.
5. Adjustment / linearization
Adjustment or linearization is required after entering configuration
data.
For carrying out adjustment see chap. Fehler! Verweisquelle
konnte nicht gefunden werden./step 6 or chap. Fehler!
Verweisquelle konnte nicht gefunden werden. for linearisation
Acknowledge using , the current setting is displayed.
Acknowledge by , select desired setting with
= Adjustment
= Linearisation
To Next Page
Loading...
Need help?
General
