KFB-TM/KFN-TM-SH-e-1410 - 32 -
finished.
either in single-range balance
Press , the unit will return to the menu Press to call up
next menu item „CAL“.
or
In a dual range balance enter readability/verification value and
capacity of the second weighing range.
Press , the display for entering the capacity of the second
weighing range will appear.
Press , the current setting will be displayed.
Using the navigation buttons (see chap. 2.1.1) select the desired
setting, the active digit is flashing.
Confirm input by .
Press , the display for entering the readability of the second
weighing range will appear.
Press , the current setting will be displayed.
Select desired setting with and acknowledge by .
Press , the unit will return to the menu
Press to call next menu item.
4. Adjustment or linearisation
Adjustment or linearisation is required after entering configuration
data.
For carrying out adjustment see chap. Fehler! Verweisquelle
konnte nicht gefunden werden./step 4 or chap. Fehler!
Verweisquelle konnte nicht gefunden werden. for linearisation
Acknowledge using , the current setting is displayed.
Press to confirm, press to select the desired setting
To Next Page
Loading...
Need help?
General
