KERN KFB-TM - Page 38

KFB-TM/KFN-TM-SH-e-1410 - 38 -
Check the load cell and connecters
Can not use full
capacity
Over load protection
stoppers or transport
locks are not removed.
Parameters are set
incorrectly.
AD problem.
Load cell or mechanism
damaged
Check the stoppers and locks under
the platform.
Check the weighing unit and parameter
settings.
Check the load cell.
Platform Corner
Weight different
Over load protection
stoppers or transport
locks are not removed.
Load cell or mechanism
damaged
Check the stoppers and locks under
the platform.
Use accurate weight for to do the
calibration
Check the load cell.
Battery not
charging
Mains voltage problem
Charging circuit problem
Battery Problem
Check the mains and adaptor.
Check the battery.
Check the charging circuit