KERN PNJ - Page 14

PNJ_PNS-SH-e-2011 - 14 -
 Observe stable environmental conditions. Stabilisation requires a certain warm-up time.
 Ensure that there are no objects on the weighing pan.
 When the PRINT-key is pressed during the adjusting procedure, [STOP] will be displayed
and adjustment interrupted. The balance returns to weighing mode.
 At the models with internal adjustment weight (KERN PNJ) the adjustment with external
weight is not possible.
 The following error messages may be displayed during adjustment.
1-Err
Wrong adjustment weight (< 50% max)
2-Err
Divergence last external adjustment > 1%
3-Err
Weighing pan loaded
4-Err
Divergence from last internal adjustment > 1%
A-Err
Internal adjustment automatics defective
Err 710
Instable environmental conditions