KERN PNJ - 7.3 CALIBRATION OF BUILT-IN WEIGHT (REFCAL)

- 15 - PNJ_PNS-SH-e-2011
7.3 CALIBRATION OF BUILT-IN WEIGHT (REF CAL)
- AJ(H)-CE TYPE -
• Following does not describe the procedure of ordinary span adjustment.
• This is the procedure of Calibration of the built-in weight of AJH-CE
scales.
• lt is necessary to adjust the linearity of the scale
beforehand. Refer to 4-6.
• The scale must be set to the non-verifiable
mode.