- 13 - PNJ_PNS-SH-e-2011
7.2 Adjustment with external weight (only models PNS)
Carry out adjustment as near as possible to the balance’s maximum weight (recommended
adjustment weight see chap. 1).Info about adjustment weights can be found in the manual for
the scale chapter 1
Press the F-key and keep pressed until „CAL“ is displayed.
With pressed TARE key, press the F-key, then release
both keys at the same time.
Ensure that there are no objects on the weighing pan.
With display „on FS“ place the required adjustment weight
carefully in the center of the weighing pan.
The adjustment process is started.
After successful adjustment the balance automatically
returns to weighing mode.
In case of an adjustment error (e.g. objects on the weighing
pan) the display will show an error message, repeat
adjustment.
Take away adjustment weight.
To Next Page
Loading...
Need help?
General
