Keurig B3000 Service Manual

B3000 SERVICE MANUAL
60-200807-000, REV C 18
9. At the end of the brewing process the image below will be displayed for 4 seconds.
10. There may be a short pause (approximately 20 seconds) before the next brewing process can
begin. The entire brew process lasts for approximately 40 to 52 seconds (depending upon brew
size selected) and ends with a burst of air to remove all liquid coffee or tea from the K-Cup.
11. Enjoy your first cup of Keurig Brewed gourmet coffee or tea!
NOTE: Following the brew, your brewer will fill in preparation for the next brew. The pump will make
a vibrating sound. This is normal.
Dispensing Hot Water
The B3000 brewer is capable of dispensing hot water for making hot chocolate, instant soups etc. The
path of the water delivery is separate from the coffee delivery path.
One of the button options is ‘Hot Water’. Hot water will be dispensed as long as the button is pressed
and held delivering a total of 8 oz max before refilling. If the button is not lit, wait for heating to
complete.

Keurig B3000 Specifications

General

Voltage	120 V
Brew Time	Under 1 minute
Compatible Pods	K-Cup pods
Brew Sizes	6, 8, 10, 12 oz
Display	LCD
Color	Black