4 Troubleshooting and Diagnostics
74 Keysight 34980A Service Guide
291 "Not able to recall state: it is empty"
292 "Not able to recall state: DMM enable changed"
301 "Module currently committed to scan"
302 "No module was detected in this slot"
303 "Module is not able to perform requested operation"
304 "Does not exist"
305 "Not able to perform requested operation"
306 "Part of a 4-wire pair"
307 "Incorrectly configured ref channel"
308 "Channel not able to perform requested operation"
309 "Incorrectly formatted channel list"
310 "Operation refused because channel is locked open"
311 "Not able to specify resolution with Auto range"
501 "Isolator UART framing error"
502 "Isolator UART overrun error"
514 "Not allowed"
514 "Not allowed; Instrument locked by another I/O session"
521 "Communications: input buffer overflow"
521 "Input buffer overflow"
522 "Output buffer overflow"
522 "Communications: output buffer overflow"
531 "Insufficient memory"
532 "Cannot achieve requested resolution"
532 "Not able to achieve requested resolution"
540 "Cannot use overload as math reference"
540 "Not able to null channel in overload"
550 "Command not allowed in local"
Error Description
To Next Page
Loading...
Need help?
General
