4 Troubleshooting and Diagnostics
80 Keysight 34980A Service Guide
935 "Trace of that name already exists"
936 "Cannot delete active trace"
937 "Digital channel not capable of specified width"
940 "State of switch unknown"
941 "No remote module present"
942 "Remote module not powered"
943 "Remote module topology change"
944 "Channel drive is paired"
945 "Remote module commands are unsupported on this slot"
946 "Remote module is unable to perform requested operation"
947 "Channel is not accessible"
948 "Invalid/missing remote module specifier"
949 "Open operation not valid for this channel configuration"
950 "Illegal operation when channel drive enabled"
951 "Switch failed to verify as expected"
952 "Internal channel drive illegal for remote slave module"
953 "Overcurrent detected"
954 "Remote modules configured in an illegal topology"
955 "Illegal operation when remote module's channel drive disabled"
956 "Module hardware: unexpected transaction termination"
Error Description
To Next Page
Loading...
