Keysight Technologies 8163A/B - Display Operations - The DISPlay Subsystem

224 8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
5 Mass Storage, Display, and Print Functions
Display Operations – The DISPlay Subsystem
The DISPlay subsystem lets you control what you see on the instrument’s
display.
:DISPlay:CONTrast
:DISPlay:CONTrast?
command: :DISPlay:CONTrast
syntax: :DISPlay:CONTrast<wsp><value>
description: Controls the contrast of the display.
parameters: An integer value in the range 0 to 100
response: none
example: disp:cont 50
affects: 8163B Lightwave Multimeter and 8166B Lightwave Multichannel System
command: :DISPlay:CONTrast?
syntax: :DISPlay:CONTrast?
description: Queries the contrast of the display.
parameters: none
response: An integer value in the range 0 to 100
example: disp:cont? -> +50<END>
affects: 8163B Lightwave Multimeter and 8166B Lightwave Multichannel System