284 8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
8 GPIB Command Compatibility List
Obsolete Commands
Table 12 on page -284 contains details of commands that have been
directly replaced.
Table 12 Obsolete Commands
Old Command New Command Affects
DISPlay:STATe/? DISPlay:ENABle/? 8153
PROGram command tree SENSe:FUNCtion command tree.
Some commands from the PROGram command tree
have not been replaced.
The HP 8153A application interface on the GPIB is not
supported.
Stability/Logging and Min/Max are available via a new
interface.
8153
Return Loss Module Commands The commands for the return loss modules will be
completely different than those for the HP 8153A.
8153
To Next Page
Loading...
