Keysight Technologies 8163A/B - Removed Command

8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide 283
GPIB Command Compatibility List 8
Removed Command
Table 11 on page -283 contains details of commands that have been
removed without replacement.
Table 11 Removed Commands
Command Change Affects
*SRE/? No support for this command/query. Both
*TRG No support for triggered commands. 8153
ABORt This command is not supported; in every case, the bus is
blocked during command execution.
8153
STATus:OPERation:
NTRansition/?
STATus:OPERation:
PTRansition/?
STATus:QUEStionable:
NTRansition/?
STATus:QUEStionable:
PTRansition/?
These status model features are not supported. 8153
SYSTem:BEEPer:STATe/? Beeper access is not supplied. 8153
*SAV
*RCL
User interface or GPIB settings cannot be stored or
recalled.
8167/8
BDATA?
DOSMODE/?
Memory card access is not provided. 8167/8
TRACe:CATalog?
TRACE:DATA?
TRACE:POINts?
The TRACe tree is not supported; the CC_UNCAL curve
does not exist.
8167/8
WAVEACT Alignment to external wavemeter is not supported. 8167/8
misc 200 Risetime control is not supported yet. 8167/8