8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide 291
Error Codes 9
Standard -109 "Missing parameter"
[Fewer parameters were recieved than required for the header]
Standard -112 "Program mnemonic too long"
[The header contains more than twelve characters (see IEEE 488.2, 7.6.1.4.1).]
Standard -113 "Undefined header"
[The header is syntactically correct, but it is undefined for this specific device; for
example, *XYZ is not defined for any device.]
Standard -120 "Numeric data error"
[This error, as well as errors -121 through -129, are generated when parsing a data
element which appears to be numeric, including the nondecimal numeric types. This error
message is used if the device cannot detect a more specific error.]
Standard -121 "Invalid character in number"
[An invalid character for the data type being parsed was encountered; for example, an
alpha in a decimal numeric]
Standard -123 "Exponent too large"
[The magnitude of the exponent was larger than 32000 (see IEEE 488.2,7.7.2.4.1).]
Standard -124 "Too many digits"
[The mantissa of a decimal numeric data element contained more than 255 digits
excluding leading zeros (see IEEE 488.2, 7.7.2.4.1).]
Standard -128 "Numeric data not allowed"
[A legal numeric data element was received, but the device does not accept one in this
position for the header.]
Standard -131 "Invalid suffix"
[The suffix does not follow the syntax described in IEEE 488.2, 7.7.3.2, or thesuffix is
inappropriate for this device.]
Standard -134 “Suffix too long”
[The suffix contained more than 12 characters (see IEEE 488.2, 7.7.3.4).]
Standard -138 “Suffix not allowed”
[A suffix was encountered after a numeric element which does not allow suffixes.]
Standard -141 “Invalid character data”
[Either the character data element contains an invalid character or the particular element
received is not valid for the header.]
Standard -148 “Character data not allowed”
[A legal character data element was encountered where prohibited by the device.]
New/Old/Standard Error
Number String
To Next Page
Loading...
