300 8163A/B, 8164A/B & 8166A/B Mainframes Programming Guide
9 Error Codes
Table 19 Overview for Unsupported Strings
Standard -410 “Query INTERRUPTED”
[Indicates that a condition causing an INTERRUPTED Query error occurred (see IEEE
488.2, 6.3.2.3); for example, a query followed by DAB or GET before a response was
completely sent.]
Standard -420 “Query UNTERMINATED”
[Indicates that a condition causing an UNTERMINATED Query error occurred (see IEEE
488.2, 6.3.2.2); for example, the device was addressed to talk and an incomplete program
message was received.]
Standard -430 “Query DEADLOCKED”
[Indicates that a condition causing an DEADLOCKED Query error occurred (see IEEE
488.2, 6.3.1.7); for example, both input buffer and output buffer are full and the device
cannot continue.]
Standard -440 “Query UNTERMINATED after indef resp”
[Indicates that a query was received in the same program message after an query
requesting an indefinite response was executed (see IEEE 488.2, 6.5.7.5).]
New/Old/Standard Error
Number String
New/Old/Standard Error
Number String
Old all positive errors
Old -110 “Command header error”
Old -111 “Header seperator error”
Old -114 “Header suffix out of range”
Old -130 “Suffix error”
Old -140 “Character data error”
Old -144 “Character data too long”
Old -160 “Block data error”
Old -201 “Invalid while in local”
Old -202 “Settings lost due to ???”
To Next Page
Loading...
