Keysight Technologies E3633A User Manual

2Quick Start
30 Keysight E3633A and E3634A Service Guide
1 Remove the power cord. Remove the fuse-holder assembly
with a flat-blade screwdriver from the rear panel.
2 Install the correct line fuse. Remove the power-line
voltage selector from the power-line module.
3 Rotate the power-line voltage selector until the correct
voltage appears.
4 Replace the power-line voltage selector and the
fuse-holder assembly in the rear panel.
NOTE
Install the correct fuse and verify that the correct line voltage appears in the
window.

Keysight Technologies E3633A Specifications

General

Brand	Keysight Technologies
Model	E3633A
Category	Power Supply
Language	English