Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide 29
Getting Started with Remote Operation
Using the Web Browser
Displaying the LAN Configuration Summary
Domain Name:
a
<empty>
TCP Keep Alive Timeout: 1800.0 sec
Signal Generator Web Server Interface
Description: Keysight <model_number>(<serial_number>)
SICL Interface Name
b
:
gpib0
Web Password: agilent
a. The Domain Name defaults to a null field.
b. This information is part of the “Advanced Information about this Web-Enabled
<signal generator model number>”
Table 1-3 LAN Configuration Summary Values
Parameter Default
For details on each key and for equivalent SCPI commands (if applicable),
use the key help (described in the User’s Guide).
Confirm Restore Settings to Factory Defaults: Confirming this action configures the signal
generator to its original factory default settings. For information regarding those default
settings, refer to Table 1-3 on page 28.
Utility > IO Config
SCPI command:
Not applicable
To Next Page
Loading...
Need help?
General
