To Next Page

To Previous Page

78 Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide

Programming Examples

GPIB Programming Interface Examples

300 PRINT ".......... Press Continue"

310 PAUSE

320 PRINT

330 LOCAL 7 ! Returns signal generator to Local control

340 ! The following print statements are user prompts

350 PRINT "Signal generator should now be in Local mode."

360 PRINT

370 PRINT "Verify that the signal generator's front-panel keyboard

is functional."

380 PRINT

390 PRINT "To re-start this program press RUN."

400 END

Local Lockout Using NI-488.2 and C++

This example uses the NI-488.2 library to set the signal generator local lockout

mode. Launch Microsoft Visual C++ 6.0, add the required files, and enter the

following code into your .cpp source file. niex2.cpp performs the following

functions:

— all front panel keys, except the contrast key

— places the signal generator into remote

— prompts the user to verify the signal generator is in remote

— places the signal generator into local

The following program example is available on the signal generator

Documentation CD-ROM as niex2.cpp.

*******************************************************************

// PROGRAM NAME: niex2.cpp

// PROGRAM DESCRIPTION: This program will place the signal generator

into

// LOCAL LOCKOUT mode. All front panel keys, except the Contrast

key, will be disabled.

// The local command, 'ibloc(sig)' executed via program code, is the

only way to

// return the signal generator to front panel, Local, control.

*******************************************************************

Keysight Technologies N5172B EXG Programming Guide

Other manuals for Keysight Technologies N5172B EXG