Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide 67
Programming Examples
Using GPIB
Using GPIB
GPIB enables instruments to be connected together and controlled by a
computer. GPIB and its associated interface operations are defined in the
ANSI/IEEE Standard 488.1-1987 and ANSI/IEEE Standard 488.2-1992. See the
IEEE website, http://www.ieee.org, for details on these standards.
The following sections contain information for installing a GPIB interface card
or NI-GPIB interface card for your PC or UNIX-based system.
— “Installing the GPIB Interface Card” on page 67
For more information on setting up a GPIB interface card or NI-GPIB interface
card, refer to:
— “Set Up the GPIB Interface” on page 38
— “Verify GPIB Functionality” on page 38
Installing the GPIB Interface Card
Refer to “Installing the GPIB Interface” on page 36.
You can also connect GPIB instruments to a PC USB port using the Keysight 82357A USB/GPIB
Interface Converter, which eliminates the need for a GPIB card. For more information, go to
http://www.keysight.com/find/gpib.
To Next Page
Loading...
Need help?
General
