To Next Page

To Previous Page

380 Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide

Creating and Downloading User–Data Files

User Flatness Correction Downloads Using C++ and VISA

//*****************************************************************

// PROGRAM NAME:FlatCal.cpp

// PROGRAM DESCRIPTION:C++ Console application to input frequency

and amplitude

// pairs and then download them to the signal generator.

// NOTE: You must have the Keysight IO Libraries installed to run

this program.

// This example uses the LAN/TCPIP interface to download frequency

and amplitude

// correction pairs to the signal generator. The program asks the

operator to enter

// the number of pairs and allocates a pointer array listPairs[]

sized to the number

// of pairs.The array is filled with frequency nextFreq[] and

amplitude nextPower[]

// values entered from the keyboard.

//*****************************************************************

// IMPORTANT: Replace the 000.000.000.000 IP address in the

instOpenString declaration

// in the code below with the IP address of your signal generator.

//*****************************************************************

#include <stdlib.h>

#include <stdio.h>

#include "visa.h"

#include <string.h>

// IMPORTANT:

// Configure the following IP address correctly before compiling

and running

char* instOpenString ="TCPIP0::000.000.000.000::INSTR";//your PSG's

IP address

Keysight Technologies N5172B EXG Programming Guide

Other manuals for Keysight Technologies N5172B EXG