74 Keysight CXG, EXG, and MXG X-Series Signal Generators Programming Guide
Programming Examples
GPIB Programming Interface Examples
//
// PROGRAM DESCRIPTION: This program verifies that the GPIB
connections and
// interface are functional.
//
// Connect a GPIB cable from the PC GPIB card to the signal
generator
// Enter the following code into the source .cpp file and execute
the program
//
//
*******************************************************************
#include "stdafx.h"
#include <iostream>
#include "windows.h"
#include "Decl-32.h"
using namespace std;
int GPIB0= 0; // Board handle
Addr4882_t Address[31]; // Declares an array of type Addr4882_t
int main(void)
{
int sig; // Declares a device descriptor
variable
sig = ibdev(0, 19, 0, 13, 1, 0); // Aquires a device descriptor
ibclr(sig); // Sends device clear message
to signal generator
ibwrt(sig, "*RST", 4); // Places the signal generator
into a defined state
// Print data to the output window
cout << "The signal generator should now be in REMOTE. The
remote indicator"<<endl;
To Next Page
Loading...
Need help?
General
