40 Keysight N5991 HDMI Frame Generator User Guide
3 Using the Software
• to alter the TMDS configuration to set the Scrambled Bit and the Pixel
Clock Ratio
• to read the TMDS configuration
• to read the scrambling status
• to read the EDID (extended display identification data)
• to read the SCDC
• to read all the status flags from SCDC
• to set the FRL rate
• to read and reset the update flags from SCDC
• to read the link training pattern requests
FLR Link Training
Clicking this option applies all FRL settings, generates the pattern and
initiates the link training (automatically, if the Auto FLT is selected).
To Next Page
