Need help?Do you have a question about the Keysight Technologies E7515B UXM 5G and is the answer not in the manual?
General| Signaling Format | 5G NR, LTE, WCDMA, GSM |
|---|---|
| Modulation | QPSK, 16QAM, 64QAM, 256QAM, 1024QAM |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Form Factor | Benchtop |
| MIMO Support | Yes, up to 4x4 MIMO |
| Supported Technologies | 5G NR, LTE, WCDMA, GSM |
| Interface | GPIB, LAN, USB |
| Operating Temperature Range | 0 °C to 50 °C |
Lists trademarks acknowledged for the E7515B UXM 5G Wireless Test Platform.
Details Keysight's warranty terms and conditions for the document and product.
Explains that hardware and software are furnished under license terms.
Outlines government rights regarding commercial computer software and technical data.
Defines CAUTION and WARNING notices for hazards and safe operation.
Provides basic steps for getting started with the E7515B UXM 5G Test Platform.
Covers instrument specifications, safety, environmental conditions, and maintenance.
Details the software framework and licensing for the UXM 5G.
Explains the role of the E7515B UXM 5G as a signaling and measurement core.
Compares the E7515B model with the economy E7515E version.
Describes accessory instruments like M1740A and E7770A for higher frequencies.
Lists available detailed product documentation and web resources.
Specifies the physical dimensions and weight of the E7515B.
Details voltage, frequency, and maximum power consumption.
Provides critical safety information regarding power and grounding.
Specifies operating and storage conditions, including temperature and humidity.
Covers protection against overpowering, cleaning, and ESD.
Details compliance with European and Canadian EMC directives.
Provides guidelines for proper airflow and temperature management.
Warns about input circuitry damage from excessive signal levels.
Provides instructions for safely cleaning the instrument's exterior.
Explains ESD risks and precautions for handling electronic components.
Lists license numbers and descriptions for UXM 5G capabilities.
Describes the applications running on the UXM 5G controller.
Provides guidance on re-installing existing test applications.
Guides on inspecting shipping containers and verifying contents.
Details requirements for placing and mounting the instrument.
Provides step-by-step instructions for initial power-on.
Explains how to add or recover licenses for the UXM 5G.
Describes how to connect the UXM 5G to a local area network.
Recommends installing critical Windows updates for protection.
Discusses security recommendations for network connections.
Provides guidance on handling damaged materials or incomplete shipments.
Specifies clearance requirements for proper airflow.
Sets the maximum ambient temperature for tabletop operation.
Provides guidelines for rack mounting, including temperature limits.
Details the recommended procedure for safely powering off the instrument.
Explains how to move licenses between instruments or PCs.
Warns against adding the host PC to corporate domains due to potential issues.
Introduces the E7515B Control Panel for managing hardware components.
Lists and describes the functions of various Control Panel icons.
Explains how to access and open the E7515B Control Panel.
Introduces the HCCU for controlling hardware configuration.
Details how to access and open the HCCU interface.
Lists the available tabs within the HCCU interface.
Explains how to configure the UXM 5G for array operation.
Displays hardware resources and provides system controls.
Provides information on current hardware configuration.
Allows selection of hardware configuration settings.
Provides information about available connection scenarios.
Provides access to path loss corrections for the system.
Provides access to Signals Status and iPerf tools.
Displays message logs for the HCCU.
Provides access to HCCU documentation.
Displays detailed properties of connected instruments.
Shows detailed hardware status in a browser window.
Provides system control functions like reset and log export.
Opens a wizard for selecting different hardware connections.
Provides information on NE mode, cells, and DAQs.
Allows running the integrated traffic generator for throughput testing.
Details the layout and components of the UXM 5G front panel.
Explains the meaning of the power status LED indicators.
Describes the connectors and modules on the rear panel.
Defines various symbols used on the instrument's panels.
Describes the 15-inch capacitive touch-screen display.
Details the DisplayPort output for external displays.
Explains the RJ-45 connector for Gigabit Ethernet.
Describes the USB 2.0 ports for peripheral devices.
Covers the AC power button and its status indicator.
Details the RF ports and their transmit/receive indicators.
Describes connectors for VDTAMC cards handling PHY/PDCP layers.
Details connectors for CCTAMC cards handling RLC/MAC layers.
Covers connectors for the optional FPGA expansion module.
Describes connectors related to the AUXM circuit board.
Details connectors related to the ICM circuit board.
Lists connectors for the DCB+ circuit board.
Describes USB 3.0 and audio connectors.
Lists SMA connectors related to the RFIO circuit board.
Details the pre-installed software and installation procedures.
Explains the default Administrator account and user management.
Covers backup, system restore, and disk management.
Provides steps for upgrading or downgrading firmware.
Guides on updating the 5G NR Test Application software.
Guides on re-installing purchased software from Keysight.
Explains the dialog-driven process for uninstalling software.
Recommends against installing non-approved third-party software.
Details operations available via the Administrator account.
Provides steps to change the Administrator account password.
Recommends a regular backup strategy for instrument data.
Discusses System Restore's limitations and recommends alternatives.
Explains the purpose and use of C:, D:, and E: drive partitions.
Details the Instrument Image Recovery System for restoring the C: drive.
Step-by-step guide for using the firmware update tool.
Provides instructions for updating the 5G NR Test Application.
Guides on using the HCCU to diagnose and resolve issues.
Provides procedures for contacting Keysight for service.
Details how to contact Keysight for support and service.
Lists Keysight sales office contact information worldwide.
To Next Page