Getting Started Guide 21
Introduction
Instrument Information and Maintenance
Environmental Conditions
This product is designed for use in the following conditions:
— For indoor use only
— Operating Temperature 10° C to 40° C, 5% to 85% (non-condensing)
relative humidity
— Storage Temperature -40° C to +70° C, 5% to 85% (non-condensing relative
humidity)
— Altitude up to 2000 meters
— OVERVOLTAGE CATEGORY II and Pollution degree 2
EMI and EMC Compliance
Complies with European EMC Directive 2004/108EC
— ICES/NMB-001
This ISM device complies with Canadian ICES-001
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
— South Korean Class A EMC declaration: This equipment is Class A suitable
for professional use and is for use in electromagnetic environments outside
of the home.
A 급 기기 ( 업무용 방송통신기 자재 )
이기기는 업무용 (A 급 ) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의
하시기 바라며 ,
가정외의 지역에서 사용하는 것을 목적으로 합니다
Ventilation
This product is designed for use in Installation Category II and Pollution Degree
2 environment.
When installing the product in a cabinet the convection into and out of the
product must not be restricted. The ambient temperature (outside the cabinet)
must be less than the maximum operating temperature of the product by 4
° C
for every 100 watts dissipated in the cabinet. If the total power dissipated in
the cabinet is greater than 800 watts, then forced convection must be used. It
is your responsibility to ensure the ambient temperature does not exceed the
rated ambient temperature stated in the specification.
To Next Page
Loading...
Need help?
General
