32 Installation Note N9030-90077
Option BBA, Analog Baseband I/Q Inputs Upgrade Kit
Adjustments and Performance Verification
Calibration Software and specified test equipment is required to perform the adjustments, and can
be used to automate the performance verification testing.
Information on how to obtain this software can be found at
http://www.keysight.com/find/calibrationsoftware
1. Perform the following adjustments, located in the TME field software.
— Absolute Amplitude (Option BBA) Adjustment
2. Perform the following performance verification tests using the TME field software:
— All Frequency Response Tests (if the switch and cables were disturbed)
— Absolute Amplitude Accuracy at 250 kHz (Option BBA)
— Frequency Response Below 250 kHz (Option BBA)
— Frequency Response Above 250 kHz (Option BBA)
— Channel Match (Option BBA)
IMPORTANT A full calibration is required to assure the instrument meets all specifications
The end user must ultimately determine whether they want a full calibration to be performed after
the installation of this upgrade or not. If a full calibration is required, arrangements regarding the
level of calibration must be made between the end user and the calibration provider.
If you require further assistance, please contact the Keysight support team.
Online assistance:
http://www.keysight.com/find/assist
If you do not have access to the Internet, contact your local Keysight Technologies Sales and
Service Office, or if in the United States, call 1-800-829-4444
(8 am - 8 pm ET, Monday - Friday).
To Next Page
Loading...
Need help?
General
