[SENSe:]VOLTage Subsystem
This subsystem configures AC voltage, DC voltage, and ratio measurements.
Command Summary
[SENSe:]VOLTage:AC:BANDwidth
[SENSe:]VOLTage:{AC|DC}:NULL[:STATe]
[SENSe:]VOLTage:{AC|DC}:NULL:VALue
[SENSe:]VOLTage:{AC|DC}:NULL:VALue:AUTO
[SENSe:]VOLTage:{AC|DC}:RANGe
[SENSe:]VOLTage:{AC|DC}:RANGe:AUTO
[SENSe:]VOLTage:AC:SECondary
[SENSe:]VOLTage[:DC]:APERture
[SENSe:]VOLTage[:DC]:APERture:ENABled
[SENSe:]VOLTage[:DC]:IMPedance:AUTO
[SENSe:]VOLTage[:DC]:NPLC
[SENSe:]VOLTage[:DC]:RATio:SECondary
[SENSe:]VOLTage[:DC]:RESolution
[SENSe:]VOLTage[:DC]:SECondary
[SENSe:]VOLTage[:DC]:ZERO:AUTO
SCPI Programming Reference
372
Keysight Truevolt Series Operating and Service Guide
To Next Page
Loading...
