The keys that access a wide range of functions are listed below.
[Acquire] key
Softkey Description
Acquire Select Continuous mode (default measurement mode), Digitize mode, or Data Log
mode.*
Trigger Set-
tings
Configure triggering.
VMC Out Set slope of VM Comp output.
Save Readings Save readings to a file.
* Digitize and Data Log modes are available only on the 34465A/70A. The Digitize mode requires the DIG
option.
[Math] key
The availability of the Math softkeys varies by measurement function.
Softkey Description
Null Enable/disable use of null values and specify null value to use.
Smoothing
Filter
(34465A/70A only) Smoothing uses a moving average (boxcar) filter to reduce random noise
in measurements. Smoothing is intended to average out small variations in the meas-
urements. Larger variations will cause the filter to reset.
dB / dBm (34460A/61A only) Configure dB, dBm
Scaling (34465A/70A only) Configure scaling: dB, dBm, %, Mx-B
Statistics Enable, disable, and clear statistics.
Limits Enable or disable high and low limits.
[Display] key
Features and Functions
54
Keysight Truevolt Series Operating and Service Guide
To Next Page
Loading...
