l
Front Panel:
If the Error annunciator is on, there are errors in the error queue. The Remote annunciator is likely on
as well. Press the Local key to return to local operation (the Remote annunciator goes off). Then press
[Help], select "View remote command error queue" in the menu and press Select. Use the menu nav-
igation "arrow" keys to view the error messages. Press Back to exit and clear the error queue.
l
SCPI:
SYSTem:ERRor? Read and clear one error from the queue
Errors have the following format (the error string may contain up to 80 characters):
-113,"Undefined header"
Keysight Truevolt Series Operating and Service Guide
461
SCPI Programming Reference
To Next Page
Loading...
