1 Getting Started
42 Keysight 34980A Getting Started Guide
6 Use the knob to select the 100 mV range for the dc voltage function.
7 Continue pressing the lighted Channel key until CHANNEL LABEL is shown.
8 At the CHANNEL LABEL choice, use the knob (to select alphanumeric
characters) and the arrow keys (to select the cursor position) to enter a custom
channel label.
9 Press the lighted Channel key to save the assigned channel label and all other
changes you made.
10 Press the Channel key in the Measure key group. Note that the Channel key
lights, the required relays automatically close, and dc voltage measurements
begin.
To Next Page
Loading...
