1 Getting Started
60 Keysight 34980A Getting Started Guide
Closing and Opening Channel Relays
1 To close a channel, left-click directly on the graphic of the desired relay.
To open a closed channel, click again on the relay graphic.
When working with dangerous voltage levels, intentional closing of multiple
bus and channel relays could cause a potential shock hazard on external
connections. Use extreme caution when handling, testing and adjusting this
instrument. Do not perform these procedures unless qualified to do so.
Failure to recognize and observe normal safety precautions could result in
personal injury or death.
You must be in the Allow Full Control mode to close and open channels.
To Next Page
Loading...
