Keysight DSOX3012T User Manual

Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide 13
Peak-Peak / 122
Max/Min Hold / 122
Measurement Trend / 122
Chart Logic Bus Timing / 124
Chart Logic Bus State / 125
6 Reference Waveforms
To save a waveform to a reference waveform location / 127
To display a reference waveform / 128
To scale and position reference waveforms / 129
To adjust reference waveform skew / 129
To display reference waveform information / 130
To save/recall reference waveform files to/from a USB storage
device / 130
7 Digital Channels
To connect the digital probes to the device under test / 131
Probe cable for digital channels / 132
Acquiring waveforms using the digital channels / 135
To display digital channels using Autoscale / 135
Interpreting the digital waveform display / 136
To change the displayed size of the digital channels / 137
To switch a single channel on or off / 138
To switch all digital channels on or off / 138
To switch groups of channels on or off / 138
To change the logic threshold for digital channels / 138
To reposition a digital channel / 139

Keysight DSOX3012T Specifications

General

Brand	Keysight
Model	DSOX3012T
Category	Test Equipment
Language	English