Keysight DSOX3012T - 22 Utility Settings; I;O Interface Settings

341
Keysight InfiniiVision 3000T X-Series Oscilloscopes
User's Guide
22 Utility Settings
I/O Interface Settings / 341
Setting up the Oscilloscope's LAN Connection / 342
File Explorer / 344
Setting Oscilloscope Preferences / 346
Setting the Oscilloscope's Clock / 349
Setting the Rear Panel TRIG OUT Source / 350
Enabling Remote Command Logging / 351
Performing Service Tasks / 352
Configuring the [Quick Action] Key / 357
This chapter explains oscilloscope utility functions.
I/O Interface Settings
The oscilloscope can be accessed and/or controlled remotely via these I/O
interfaces:
• USB device port on the rear panel (square shaped USB port).
• LAN interface on the rear panel.
To configure the I/O interfaces:
1 On the oscilloscope's front panel, press [Utility].
2 In the Utility Menu, press I/O.
3 In the I/O Menu, press Configure.