Installation 1
Network Analyzer 27
Connecting the Accessories
You need to connect some accessories before use.
Connecting the BNC Adaptor (Option 1E5)
When the E5061B is equipped with Option 1E5
(high-stability frequency standard), connect the BNC adaptor
from the Ref Oven terminal to the Ref In terminal on the
rear panel as shown in Figure 4. The BNC adaptor is included in
Option 1E5. When Option 1E5 is installed, the frequency
accuracy and stability of the E5061B improves further.
Connecting Mouse and Keyboard
The E5061B allows you to connect Mouse and/or keyboard
through USB. USB mouse and keyboard can be connected
with the USB ports on the front or rear panels.
Initial registration of the E5061B requires the mouse and
keyboard before turning on the power.
Figure 4 Connecting the BNC adaptor
e5061b059
VIDEO
GPIB
TEST SET I/F
Serial Label
Windows Label
E5061B
10 MHz
4
ICES/NMB
-
001
WARNING:
No operator serviceable parts inside.
Refer servicing to qualified personnel.
50/60 Hz 300 VA Max
LINE
115 V
To Next Page
Loading...
Need help?
General
