Keysight EDUX1052G - 8 Serial Bus Decode;Trigger; 9 Display Settings; To set or clear persistence; 11 Triggers

12 Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide
To save/recall reference waveform files to/from a USB storage
device / 80
8 Serial Bus Decode/Trigger
9 Display Settings
To adjust waveform intensity / 83
To set or clear persistence / 85
To clear the display / 86
To select the grid type / 86
To adjust the grid intensity / 87
To add an annotation / 87
To freeze the display / 89
10 Labels
To turn the label display on or off / 91
To assign a predefined label to a channel / 92
To define a new label / 93
To load a list of labels from a text file you create / 94
To reset the label library to the factory default / 95
11 Triggers
Adjusting the Trigger Level / 99
Forcing a Trigger / 99
Edge Trigger / 99
Pulse Width Trigger / 102
Pattern Trigger / 104
Rise/Fall Time Trigger / 106