Need help?Do you have a question about the Keysight ixia UHD100T32 and is the answer not in the manual?
General| Brand | Keysight |
|---|---|
| Model | ixia UHD100T32 |
| Category | Test Equipment |
| Language | English |
Provides an overview of the UHD100T32, its capabilities, and supported technologies for network testing.
Details the hardware, physical interfaces, port speeds, and software features of the UHD100T32 chassis.
Lists detailed hardware attributes including chassis, power, fans, temperature, and compliance.
Covers physical interfaces, port speeds, transceivers, and cable media for network connections.
Describes transmit/receive engines, stream controls, frame sizes, and operational features for performance testing.
Details the front and rear panel components, including ports, LEDs, and connectors on the UHD100T32.
Outlines the necessary hardware for setting up and connecting to the UHD100T32.
Lists the required software versions for interacting with the UHD100T32 web application.
Illustrates the high-level process for initial setup and configuration of the UHD100T32 fixed chassis.
Guides on unpacking the UHD100T32 unit and performing rack mounting procedures.
Instructions for connecting the UHD100T32 to the network and signing into its console via serial, SSH, or keyboard.
Details on configuring IP addressing, system time, offline updates, and installing licenses for the UHD100T32.
Covers procedures for restarting and shutting down the UHD100T32 system.
Addresses common questions regarding port status indicators and IP address assignment requirements.
Discusses licensing issues and lists the TCP/UDP ports used by the UHD100T32.
Details commands for setting, showing, and managing date, time, and timezone settings.
Covers commands for managing DNS servers, hostnames, and IP addresses.
Describes commands for system shell access, snapshots, poweroff, reboot, and welcome screen display.
To Next Page