3.
Connect the two power supplies to a 90 to 240 VAC power source.
4.
Push the power button on the UHD100T32.
5.
Verify the LED indicators to ensure that your system is operating correctly.
Sign in to UHD100T32
As a new user, you need to sign in to the UHD100T32 fixed chassis. To sign in and access the
UHD100T32 Administrative Console, you can use any one of the following options:
l
Serial connection
l
SSH session
l
Keyboard
Serial connection
To start a serial session, do the following:
Chapter 4 How do I...
– 21 – 913-2626-01
To Next Page
Loading...
