Keysight ixia UHD100T32 - Kcos Date-Time Ntp-Servers Show

kcos date-time ntp-servers show
Use the kcos date-time ntp-servers show command to display the list of known NTP servers and
their status (enabled or disabled).
Syntax
kcosdate-time ntp-servers show [flags]
Flags
-h, --help Display help for the command
Arguments
None.
Examples
kcos date-time ntp-servers show
kcos date-time ntp-servers show --help
See also
kcos date-time ntp-servers set
kcos date-time ntp-servers delete
Appendix A KCOS CLI command reference
– 43 – 913-2626-01