1.
Provide the IP address of the UHD100T32 fixed chassis in the URL.
2. Enter your credentials and select LOGIN. The UHD100T32 web UI page appears.
3. Select NEW SESSION to create a new session.
Restart UHD100T32
We recommend you to restart UHD100T32 by using the KCOS console.
To restart UHD100T32, do the following:
1.
Open a serial connection or an SSH connection from your terminal emulation application.
The KCOS console prompts you to sign in.
2.
Enter the following credentials:
l User ID: admin
l Password: admin
The command line interface prompt appears.
3.
Type kcos system reboot.
UHD100T32 runs an orderly shut down of all processes, and then restarts the system. The operation
may take several minutes to complete.
Shut down UHD100T32
We recommend you to use the KCOSconsole to shut down UHD100T32.
Chapter 4 How do I...
– 31 – 913-2626-01
To Next Page
Loading...
