CHAPTER 1 About UHD100T32
This section contains an overview of the UHD100T32 fixed chassis and its specifications.
Section contents:
Overview 1
Specifications 1
Overview
UHD100T32 is the industry’s highest density 100GE test solution that addresses the density challenges
of validating 100GE devices and networks in a cost-effective way. In just a 1U form-factor, the fixed
chassis provides 32 QSFP28 100GE ports, ready for use cases ranging from white box production-line
testing to data center pre-deployment and post-deployment testing.
This fixed chassis supports 100GE, 50GE, 40GE, 25GE, and 10GE fan-out speed test capabilities. It
also includes Keysight’s proven technology for layer 2 to 3 traffic generation and analysis. Optional
routing protocols are available that include OSPF, BGP, and ISIS and RFC 2544 benchmark test
capabilities.
Specifications
This section describes the specifications, switch, power, and LED controls of the UHD100T32 fixed
chassis.
Hardware specifications
The hardware specifications are listed in the following table.
The current datasheet containing detailed specifications is available on the website:
https://www.ixiacom.com/products/uhd100t32-32-port-100ge-test-system
Specifications
UHD100T32
Perpetual
Part number: 944-
1180
UHD100T32
Base Subscription
Part number:
U100-BASE
UHD100T32
Standard
Subscription
Part number: U100-
STANDARD
Hardware Fixed Chassis System Specifications
– 1 – 913-2626-01
To Next Page
Loading...
