Connect UHD100T32
You need to connect the UHD100T32 fixed chassis to physically set it up for operation. To connect the
chassis, do the following:
1.
Record the following information before connecting the chassis:
l Host Name (for example, U100-CN19520035) from a label at the bottom of the unit and also
on the green pull tab on the right side of the front panel
l Part number (for example, 944-1180) from a label at the side of the unit
You can record these on the form Record product information.
2.
Connect the MGMT LAN port on UHD100T32 to your network. This port supports 100 M, 1G, and
10G ethernet.
Chapter 4 How do I...
913-2626-01 – 20 –
To Next Page
Loading...
