CHAPTER 4 How do I...
This section describes the tasks needed to set up the UHD100T32 fixed chassis for operation and to
configure it for operation in your network.
Section contents:
Unpack UHD100T32 15
Rack mount UHD100T32 16
Connect UHD100T32 20
Sign in to UHD100T32 21
Configure UHD100T32 25
Connect to UHD100T32 30
Restart UHD100T32 31
Shut down UHD100T32 31
Unpack UHD100T32
You need to unpack the unit before physically setting it up for operation. To unpack, do the following:
1.
Unpack the unit from the shipping container, and verify that you have all the required
components.
The shipping carton contains the following items:
l One UHD100T32 fixed chassis
l One rack mounting kit (two front-post brackets, two rear-post brackets, 20 screws, two ear-
locking screws)
l Two 90-240VAC power cords
l One RJ45 to DB9-F cable
l One USB to DB9-M adapter
l Keysight standard warranty notice
– 15 – 913-2626-01
To Next Page
Loading...
