Keysight ixia UHD100T32 - Kcos Date-Time Ntp Enable

kcos date-time ntp enable
Use the kcos date-time ntp enable command to enable the NTP settings on the node.
Syntax
kcosdate-time ntp enable [flags]
Flags
-h, --help Display help for the command
Arguments
None.
Examples
kcos date-time ntp enable
kcos date-time ntp enable --help
See also
kcos date-time ntp disable
kcos date-time ntp-servers
Appendix A KCOS CLI command reference
– 45 – 913-2626-01