To shut down UHD100T32, do the following:
1.
Open a serial connection or an SSH connection from your terminal emulation application.
The KCOS console prompts you to sign in.
2.
Enter the following credentials:
User ID: admin
Password: admin
The command line interface prompt appears.
3.
Type kcos system poweroff.
4. Select Enter to start the graceful shutdown.
UHD100T32 runs an orderly shut down of all processes, and then turns off the system.
Chapter 4 How do I...
913-2626-01 – 32 –
To Next Page
Loading...
