Keysight EDUX1052G - 22 Utility Settings; I;O Interface Settings; Setting up the Oscilloscopes LAN Connection; Setting Oscilloscope Preferences

Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 17
Recalling Default Setups / 224
Performing a Secure Erase / 224
21 Print (Screens)
To print the oscilloscope's display / 227
To set up network printer connections / 229
To specify the print options / 230
To specify the palette option / 230
22 Utility Settings
I/O Interface Settings / 231
Setting up the Oscilloscope's LAN Connection / 232
To establish a LAN connection / 233
Stand-alone (Point-to-Point) Connection to a PC / 234
File Explorer / 234
Setting Oscilloscope Preferences / 236
To choose "expand about" center or ground / 237
To disable/enable transparent backgrounds / 237
To load the default label library / 237
To set up the screen saver / 237
To set Autoscale preferences / 239
Setting the Oscilloscope's Clock / 240
Setting the Gen Out Source / 240
Enabling Remote Command Logging / 241
Performing Service Tasks / 243
To perform user calibration / 243
To perform hardware self test / 244
To perform front panel self test / 244
To export crash log files / 244