Keysight FieldFox User Manual

Contents
Do you have everything? ..................... 1
The Power Button and LED ........ 1
Connector Care……………………………….2
Battery Usage ...................................... 3
Measure Return Loss (CAT Mode) ...... 4
Measure 1-Port Cable Loss (CAT) ....... 5
Measure Distance to Fault (CAT) ........ 6
Measure S-Parameters (NA Mode) ..... 7
Multi-Trace Configurations (NA Mode)9
Calibration (CAT, NA, VVM) ............... 10
Spectrum Analyzer (SA Mode) .......... 11
Channel Measurements (SA) ............. 12
Record Playback (Opt 236) ............... 13
Power Meter Mode ............................ 14
Save and Recall Files ......................... 15
Quick Reference Guide
Keysight FieldFox
Microwave Analyzers

Keysight FieldFox Specifications

General

Brand	Keysight
Model	FieldFox
Category	Measuring Instruments
Language	English

Summary

Measure Return Loss (CAT Mode)

Return Loss Measurement Procedure

Step-by-step guide to measuring return loss using the CAT mode, including optional settings.

Measure 1-Port Cable Loss (CAT Mode)

1-Port Cable Loss Measurement

Procedure for measuring 1-port cable loss in CAT mode, including required equipment and optional steps.

Measure Distance to Fault (CAT Mode)

Distance to Fault Measurement Procedure

Steps to measure distance to fault using CAT mode, including required equipment and specific settings.

Measure S-Parameters (NA Mode)

S-Parameter Measurement Setup

Guide to configuring FieldFox for S-parameter measurements in NA mode, including selecting measurement types.

Measure S-Parameters (NA Mode) Continued

NA Mode Settings and Adjustments

Calibration Procedures (CAT, NA, VVM)

Calibration Process and Conditions

Spectrum Analyzer (SA Mode) Operation

SA Mode: Compression Check and RF Attenuation

Channel Measurements (SA Mode)

SA Channel Measurement Types

Power Meter Mode Operation

Power Meter Measurements with USB Sensor