Keysight Infiniium MSOS804A Service Guide

86 S-Series Oscilloscopes Service Guide
5 Replacing Assemblies
3 To remove the display/touch screen assembly, first remove the four M3 screws,
two on each side, connecting the display to the deck.
4 Disconnect the LVDS cable.
CAUTION
When replacing the display/touch screen assembly, make sure the backlight cable is
securely seated. If it is not, the display may be dim in one corner of the display.

Keysight Infiniium MSOS804A Specifications

General

Brand	Keysight
Model	Infiniium MSOS804A
Category	Test Equipment
Language	English